Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Parameter
Connect automatically
A way of specifying the
service name
Service name
Without authorization
PPP Username
Password
Password confirmation The confirmation of the entered password (to avoid mistypes).
Encryption
Authentication
algorithm
Keep Alive
Extra options
IP received
MTU
PPTP/L2TP settings
Select the checkbox to enable auto-start of the connection upon the
boot-up of the router.
Select a way of specifying the address of the PPTP or L2TP server.
The IP or URL address of the PPTP or L2TP server.
Select the checkbox if you don't need to enter a username and
password to access the Internet.
A username (login) to access the Internet.
A password to access the Internet.
Select a method of MPPE encryption.
No encrypt: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-
•
bit key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MSCHAP,
MACHAPv2, or AUTO value is selected from the Authentication
algorithm drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Advanced options of the pppd daemon which need to be specified for
this connection. Optional.
The IP address assigned by the ISP.
The maximum size of units transmitted by the interface.
Page 44 of 108
Configuring via Web-based Interface
Description
keep you connected to
Advertisement
Table of Contents
