Adding Fabric Softener - Electrolux EWT654XW User Manual

USE
Dose the amount as recommended
by the manufacturer and do not mix
bleach with detergent to avoid
chemical reaction.
Do not overfill the siphon cap for
the liquid bleach.

Adding Fabric Softener

Fabric softener
dosing compartment
Fabric Softener function
You can add fabric softener into dosing
compartment as shown above. The
machine is designed to dispense the
fabric softener in the final rinse cycle.
Measure the correct amount as
recommended on the softener package
into a cup and then pour it into the
compartment on the balance ring.
Please rotate inner drum clockwise until
you can add softener into the dosing
compartment conveniently.
The maximum dose is 40ml.
Deactivate Softener Reminder "SO"
warning tone
During the program cycle, press the
"Program" button for 3 seconds, the LED
will display "SO" for 1 second, "CL" for 1
second and buzzer will sound for 1 second.
After this operation, "SO" warning tone for
all programs will be cancelled but the LED
will still show "SO" before the last rinse.
Reactivate Softener Reminder "SO"
warning tone
During the program cycle, press the
"Program" button for 3 seconds, the LED
will display "SO" for 1 second, "ON" for 1
second and buzzer will sound for 2
seconds. The "SO" warning tone is
restarted. Washer will buzz and show
"SO" on LED before last rinse.
The machine will display "So" (Softener)
with beeping alarm before the last rinse
so that you can add softener manually
if you have forgotten at start of washing
cycle.It is recommended to manually
dose concentrated softener instead of
using the auto dosing function as the
dosing performance can be affected by
the softener viscosity.
Before dosing softener manually, please
dilute softener with water first in order
to prevent staining to your clothes.
1. Unbalancing of the drum during
washing or opening of the lid during
spinning may result in early dosing
of the softener before the last rinse.
2. Please deactivate "Child Lock"
before the manual addition of softener
if the "Child Lock" function had been
activated. Failure to do so may result
in draining of the water due to the
safety function of "Child Lock".
3. The Auto Dosing function will not
work if rinse option is selected as "1".
10