General Settings; Pin Code - Velleman CTC1000 User Manual

2. Use the arrow keys to select the number you want to change and press OK.
This will clear the phone number.
3. Key in the phone number and press OK.
The number can contain up to 20 digits and characters * & #.
o
When entering a number, the key
o
To delete a phone number
1. Enter Program mode and select Tel. Settings from the menu.
The display lists the phone numbers.
2. Use the arrow keys to select the number you want to delete and press OK.
3. Press OK again.
The number is deleted.
7.3

General settings

To access the menu item: enter Program mode and select Gen. Settings from the menu.
The menu items are
7.4

Pin code

Use Required to arm and disarm the alarm system.
•
Required to access Program mode (together with the master code).
•
Default value User 1: 1234
•
User 2 to 4: not set
•
Properties
• 4 digits
• Mandatory
The code for user 1 cannot be deleted.
•
Will be reset to default when resetting the system (see chapter System reset)
•
The pin code needs to be different from the master code
•
To set a pin code
1. To access the menu item: enter Program mode, go to Gen. Settings, select Pin code and press OK.
V. 04 – 11/02/2016
CTC1000
acts as backspace.
8 ©Velleman nv