FOR-A MBP-100PD Series Operation Manual page 3

Table of Contents

Advertisement

Precautions
Important Safety Warnings
[Power]
Operate unit only on the specified supply voltage.
Caution
Disconnect power cord by connector only. Do not pull on cable portion.
Do not place or drop heavy or sharp-edged objects on power cord. A damaged cord
can cause fire or electrical shock hazards. Regularly check power cord for
excessive wear or damage to avoid possible fire / electrical hazards.
Stop
[Grounding]
Ensure unit is properly grounded at all times to prevent electrical shock hazard.
Caution
Do not ground the unit to gas lines, units, or fixtures of an explosive or dangerous
nature.
Hazard
Ensure power cord is firmly plugged into AC outlet.
Caution
[Operation]
Do not operate unit in hazardous or potentially explosive atmospheres. Doing so
could result in fire, explosion, or other dangerous results.
Hazard
Do not allow liquids, metal pieces, or other foreign materials to enter the unit. Doing
so could result in fire, other hazards, or unit malfunction.
Hazard
If foreign material does enter the unit, turn power off and disconnect power cord
immediately. Remove material and contact authorized service representative if
damage has occurred.
[Transportation]
Handle with care to avoid shocks in transit. Shocks may cause malfunction. When
you need to transport the unit, use the original packing materials or alternate
adequate packing.
Caution
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbp-100pd16gMbp-100pd64gMbp-100pd128g

Table of Contents