Table of Contents
Advertisement
2-2. Rear Panel
15 16
17
No.
Name
1
INPUT 1
2
INPUT 2
3
GENLOCK
4
OUTPUT 1
5
OUTPUT 2
6
OUTPUT 3
7
OUTPUT 4
8
VGA
LAN1
9
LAN2
USB3
10
USB4
11
Audio out
GPI /
12
ALARM
13
RS-232C
14
REMOTE
15
AC IN
Ground
16
Terminal
17
Cooling Fan
4
5
1
2
For the serial digital component video input (HD/SD SDI). (BNC
connector)
The input selector is internally provided to select which input to record
from input signals in INPUT 1 and 2.
To preview an input video while recording, the input video must be
synchronized with the reference signal input.
For the reference signal input (Black Burst or Tri-level sync signal).
Either connector can be used for the input. The one which is not used
for reference input will be loop through output. The output connector
must be terminated with 75 ohm resistor when it is not used.
For the serial digital component video output (HD/SD SDI). (BNC
connector)
OUTPUT 1, 2, 3, and 4 output the same signal.
For the output to VGA monitor. (15-pin mini D-sub)
For the connection to the Ethernet port of a computer.
(100BASE-TX/1000BASE-T, RJ-45)
LAN2 is not in use.
For connecting USB devices such as a keyboard, mouse, and other
USB devices. (USB2.0 compatible)
Audio connector for monitoring audio while previewing video.
Compliant to Intel High Definition Audio, 2ch (Realtek ALC262)
For the power / fan alarm output and the GPI input/output. (15-pin
D-sub female)
RS232C serial control connection used to controll from a PC.
(9-pin D-sub, male)
RS422 serial control connection used to control from a PC.
(9-pin D-sub, female)
For the connection to AC power source via supplied AC cord.
(100-240VAC 50/60Hz)
For grounding unit to protect operators against static electricity and /
or electrical shock.
For cooling unit to prevent overheating. Do not block the vent with
other equipment or objects.
10
6
7
11
12
VGA
LAN2
3
8
9
Description
14
13
LAN1
USB4
USB3
10
Advertisement
Table of Contents
