3-3. Genlock Settings
The vertical and horizontal system phases applied to the output video can be adjusted with the
genlock signal on the MC Server Tool.
To use the MC Server Tool, connect a VGA monitor, a mouse and a keyboard. Note
that all applications should be closed before starting the MC Server Tool.
1. Double-click the MCServer icon on the desk top to start the application.
2. Select VIDEO CONFIG... from the Mode menu.
3. Select a suitable TV Format and Genlock Format for use.
TV Format
Genlock Format
IMPORTANT
Select a suitable TV format.
Black Burst
>>
Tri-level Sync
>>
16
Select B.B.
Select TRI.