Graco TrueCoat 360 Owner's Manual page 10

Start Up
9. Air from pump may have entered the
FlexLiner during priming. Repeat Steps
4 - 6 to ensure all air is evacuated.
10. Turn Prime Pump/Spray knob forward to
spray position.
10
11. Make certain spray tip is in the spray
Spray
12. You are now ready to spray.
NOTE: For best results; to evacuate all
material from the FlexLiner when the material
is nearly gone, gently squeeze the bottom of
the FlexLiner to push the last of the material
ti23288a up to the cup lid.
position.
SPRAY UNCLOG
ti23290a
333394L