Connecting The Camera; Device Client; Installing The Pc Client - Time2 HSIP2 User Manual

Connecting the Camera

1. Screw the WiFi Antenna into gold screw at the back of the camera
2. Plug the power adaptor into the port at the back of the camera
3. Plug one end of the Network/Ethernet cable into camera and the
other end into your Wireless Internet Router. It will take
approximately 30 seconds for the camera to power up.
4. Once the power cable and Ethernet cable have been connected,
the green LED light will come on.

Installing the PC Client

Visit the following webpage –
download the "IP Camera for PC" software. (Click to download)

Device Client

www.time2technology.com
6
to