Time2 HSIP2 User Manual page 54

SMTP Port
This will be automatically filled in once the server has been selected
Need Check
Please ensure this is always ticked as some mail servers require
authentication to receive emails
SMTP Details
Please enter the correct SMTP Username (email address) and
SMTP password (password used for the email address).
Receiver
Finally enter the email addresses you would like the email
notifications to go to
Once the details have been entered correctly, click the 'Test' button
to send a test email.
Please note: The camera needs to be connected to the internet at
all times for this feature to work.
SD Card Settings
This gives you all the information about the device. e.g. Firmware
version, serial number, Alarm status, SD card capacity etc.
When first inserting an SD Card, you will be required to format the
SD card (simply click the format button). Once formatted, you will
be able to select conditions such as 'Record audio' or 'Timer
recording' etc.
Alternatively, you could specify the times you would like the camera
to start recording. Once complete, click the Set button to save the
changes.
53