Time2 HSIP2 User Manual page 40

Wi-Fi Setting
The Wireless Settings can be set and changed by clicking on this
tab. Please note: when setting the camera up for the first time, it will
need to be wired into the internet router first, before the wireless
function is activated.
Click 'Manage Wi-FI network' to search for existing wireless
networks then select the network you would like to connect to.
Enter the password then click 'Done'. The camera will automatically
configure itself with the router.
This function is used to setup the wireless function. The device will
restart once the settings have been configured. You can then
unplug the Ethernet Cable from the wireless router to test whether
the camera works remotely.
39