What To Do In The Event Of A Fault - Siemens TK 50 N 01 Operating Instructions Manual

Table of Contents

Advertisement

en
S
Switch on the appliance with button
and wait until all four buttons
7 and
8 light up.
S
Simultaneously hold down button
button
8 for at least 3 sec.
The programme starts, the descaling liquid
flows for a brief period automatically at
intervals from inside the appliance into the
drip tray 16. Then only button
S
Push the lever 4 forwards and empty the
remaining liquid out of the water tank 9
through the steam pipe 12 into the vessel.
When the tank is empty, the pump switches
off.
S
Then push back the lever 4 and press
button
1. The lamp
S
Carefully pour the descaling liquid out of the
vessel back into the water tank 9. Place the
vessel under the coffee outlet 21 and the
steam pipe 12 over the vessel.
S
Switch on the appliance with button
and wait until all four buttons
7 and
8 light up.
S
Simultaneously hold down button
button
8 for at least 3 sec.
The programme starts, the descaling liquid
flows for a brief period automatically at
intervals from inside the appliance into the
drip tray 16.
S
Press button
has run through.
Repeat the process until the tank is empty.
S
Press button
S
Empty the vessel, the water tank 9 and the
drip tray 16 and rinse with plenty of water.
S
Fill the water tank 9 with fresh water and
re insert all parts.
Place the vessel under the coffee outlet 21
and the steam pipe 12 over the vessel.
S
Switch on the appliance with button
and wait until all four buttons light up again.
S
Press button
has run through.
Repeat the process until the tank is half
empty.
16
Downloaded from CoffeeMachineManual.com Manuals
1,
1 is lit.
1 is still lit.
1,
8 and wait until the liquid
1 lamp
1 is still lit.
8 and wait until the liquid
S
Empty the vessel.
1
S
Push the lever 4 forwards and empty the
2,
remaining liquid out of the water tank 9
through the steam pipe 12 into the vessel.
7 and
When the tank is empty, the pump switches
off.
S
Push back the lever 4 and press button
1, light
S
Empty, clean and re insert the drip tray 16
and capsule container 20.
The descaling programme has ended.
S
Wipe the outside of the appliance with
a damp cloth.
What to do in the event
of a fault?
The appliance is not functioning.
S
Check whether there has been a power
failure or the mains plug has been pulled out.
1
Hot water or steam cannot be drawn.
2,
S
The nozzle 15 is blocked. Clean the nozzle
with a detergent solution and a blunt needle.
7 and
Milk froth is too little or too runny.
S
The CAPPUCCINO/CAFFELATTE frothing
device 14 is blocked.
Clean the frothing device 14 with a mild
detergent solution.
S
Use cold, semi skimmed milk for frothing.
Water is dripping or running out of the
steam pipe 12
S
Move the hot water /steam lever 4 all the
way back. If water continues dripping,
descale the appliance.
Indicator light flashes or an acoustic
signal sounds.
S
See the chapter on Optical and acoustic
messages".
1
Capsule is not conveyed into the
capsule container 20 or the coffee
is too watery.
S
Please call the Siemens Hotline or the
NESPRESSO
1 is still lit.
club.
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents