Sanyo VPC-E6EX Xacti Instruction Manual page 126

3
Select "CHANGE SETTINGS", and
press the SET button.
h The screen to change the settings
appears.
4
Toggle the SET button up or down
to select the desired setting, and
press the SET button.
h The screen to select operation
sounds appears.
<If "TURN ON/OFF" or "AUDIO GUIDE" is selected>
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
<If "SHUTTER" or "KEY SW" is selected>
h The screen to select the operation sounds appears.
h Select from 8 different sounds (A to H).
h You can press the shutter button to preview the selected operation
h If "OFF" is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
<If OPERATION VOL was selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to 7
h Toggle the SET button up or down to select the volume, and press
5
Select "EXIT", and press the SET button.
h The operation sound settings are completed.
Downloaded From camera-usermanual.com Sanyo Manuals
and press the SET button.
ON:
Activates the sound.
OFF:
Deactivates the sound.
sound.
and press the SET button.
(maximum).
the SET button.
OPERATION BEEP
TURN ON/OFF
SHUTTER
KEY SW
AUDIO GUIDE
OPERATION VOL
EXIT
English
ON
D
A
ON
4
120