Connecting To Your Wi-Fi Network - Honeywell RTH6500 User Manual

Connecting to your Wi-Fi network

To complete this process, you must have a wireless device connected to your home
wireless network. Any of these device types will work:
• Tablet (recommended)
• Laptop (recommended)
• Smartphone
If you get stuck...
removing the thermostat from the wallplate, wait for 10 seconds, and snap it back
onto the wallplate. Go to Step 1 in this procedure.
View the Wi-Fi Enrollment video at wifithermostat.com/videos
1 Connect to your thermostat.
1a Make sure the thermostat displays
Wi-Fi Setup.
1b On the wireless device (laptop, tablet,
smartphone), view the list of available Wi-Fi
networks.
1c Connect to the network called
NewThermostat_123456 (the number will
vary).
Note:
If you are asked to specify a home, public, or
office network, select Home Network.
2 Join your home network.
2a Open your web browser to access the
Thermostat Wi-Fi Setup page. The browser
should automatically direct you to the correct
page; if it does not, go to http://192.168.1.1
2b Find the name of your home network on this
page and select it.
Note:
Some routers have enhanced features such as
guest networks; use your home network.
2c Complete the instructions for joining your Wi-Fi
network and click on the Connect button.
(Depending on your network setup, you may see
an instruction such as Enter Password for your home network.)
Note:
If you did not correctly connect to the thermostat, you may see
your home router page. If so, return to Step 1.
69-2715EF—07
at any point in this procedure, restart the thermostat by
10
HOLD
M33852