Page 14
4.2 USING THE ELECTRIC BURNER IN BUILT-IN COMBINED PRODUCTS : In built-in combined products, the hob part of the product is controlled via the 7-stage button on the control panel (Figure 8-9). Stage "0" means off position. The remaining 6 stages indicate the following types of use: 1..Heat Maintenance Position 2 - 3..Heating in Low Temperature Position...
Page 15
4.3 The Features of Your Hob You can adjust each burner of your product to 6 stages. 0- Off position 1- Lowest temperature position 6- Highest temperature position The Dual Burner can heat in 2 different positions. You can save power and time by running stage 1 for small pots (o 115mm) and stages 1 and 2 (o 180mm) simultaneously for large pots.In order to run the small diameter part of the dual burner, press the “Dual Burner Selection Button”.
Page 16
In order to prevent waste of energy, the pots to be used should not be smaller or larger than the burner surfaces. Take the necessary measures so that small children will not come close to the burner surface in any way, as it will be hot in operating position. Due to the flammable nature of hot oil, operations such as frying should be performed with the container lids closed.
Page 17
Table 1 The Oven Light will be turned on. The oven light, the red warning light and the fan will be turned on. Performs the function of defrosting the frozen foods. The oven’s thermostat and warning lights and the lower and upper heating elements will be switched on.
Page 18
4.6 USING THE OVEN FUNCTION CONTROL BUTTON : Availability of the functions explained below vary depending on the product model. Defrost Function : You can start the defrost operation by putting the frozen food into the oven and bringing the button to the indicated mark.
Page 19
If you are going to cook using two trays at the same time; while adjusting the cooking temperature, select the temperature that is the lowest among the levels suitable for your foods, as shown on the table. Cooking with two trays requires additional cooking time compared to cooking with one tray.
Page 20
Take the cooked/baked food out of the oven, place it on a safe place and ensure that the oven completely cools off by keeping the oven door open. As the oven will be hot, stay away from the oven and keep your children away as well. Upper Heating Element, Grill and Roast Chicken Function : This function is used for faster grills and for grills on a larger surface, roast chicken and roast on skewer.
Page 21
4.7 USING THE MECHANIC TIMER : Manuel Operation Operating by adjusting the time When you bring the Timer Rotate the timer button clockwise button to the position to a certain time range between indicating M as shown on the 0-100 minutes, as shown on the picture, you can continuously picture.
Page 22
The audible warning time can be set to a time between the time range of 0 and 23.59. When the time is up, the timer gives an audible warning and the symbol begins to flash on the screen. Pressing any key will stop the audible warning and the symbol disappears on the screen.
Page 23
First; keep pressing on the MODE button until you see "stop" on the timer screen. When you see "stop" on the timer screen, the symbol (A) will begin to flash. Adjust the cooking period for the food you wish to cook, by using the (+) and (-) keys while the timer is in this position. Some time after the adjustment operation is completed, the day’s time will appear on the screen and the symbols (A) and will begin to continuously light on the screen (Figure 14).
Page 24
Oven Function Selection : Push the function button forward to select the desired cooking function. Turn the protruding button clockwise until you see the desired function on the display part. When you select the light function, only the oven illuminating light will operate and the display part will show "Lit". When the defrost function is selected, temperature adjustment for the oven interior cannot be made and the display will show “Del”.
Page 25
Semi-Automatic Programming : When the oven function button is in 0 position, no programming can be carried out. Also; if the oven button is brought to the “off” position for any reason when programming is carried out, the programming will be cancelled. This function is used to cook in the desired time range.
Page 27
Accessories Used in the Oven : It is recommended that you use the containers indicated on the table depending on the food you will cook in your oven. Apart from the oven trays and inner grill roast chicken skewer which are supplied together with your oven, you can also use glass containers, cake cutters, special oven trays suitable for use in your oven, available in the market.
skewer handle skewer insertion hole skewer insertion hole lid skewer tip Use of rotisserie accessories Pass the skewer through the chicken and lock the clamps, insert the tip of the skewer into the hole found at the rear panel of cavity and make sure that it completely leans on the frame and fits in motor shaft.
Page 29
PART 5 : CLEANING AND MAINTENANCE OF YOUR OVEN 5.1 CLEANING Before starting to clean your oven, be sure that all control buttons are off and your appliance is cooled off. Unplug the appliance. Do not use cleaning materials containing particles that might scratch the enamelled and painted parts of your oven.
Page 30
Scrubbing with steel cleaning wires may harm the vitroceramic glass surface. Formations of dust on the surface should be cleaned up using a dampened cloth. Changes in colour which might occur on the ceramic glass surface do not affect the functional structure or permanence of the vitroceramic.
5.4 MAINTENANCE : Replacing the Oven Light It is recommended that you leave this operation to the Authorised Service. Unplug the oven first and make sure that it is cold. After removing the lid infront of the light, take also the bulb out of its place.
PART 6 : SERVICE AND TRANSPORT 6.1 REQUIREMENTS BEFORE CONTANTİNG TO SERVICE If the oven does not operate ; The oven may be plugged off, there has been a black out. On models fitted with a timer, time may not be regulated. If the oven does not heat ;...
Need help?
Do you have a question about the WO500 and is the answer not in the manual?
Questions and answers