Phoenix Installation Steps In Brief - Nokia RM-217 Sevice Manual

RM-217; RM-222
Service Software Instructions

Phoenix installation steps in brief

Prerequisites
Recommended hardware requirements:
• Computer processor: Pentium 700 MHz or higher
• RAM 256 MB
• Disk space 100-300 MB
Supported operating systems:
Windows 2000 Service Pack 3 or higher
•
Windows XP Service Pack 1 or higher
•
Context
Phoenix is a service software for reprogramming, testing and tuning phones.
Phoenix installation contains:
• Service software support for all phone models included in the package
• Flash update package files for programming devices
• All needed drivers for:
• PKD-1 (DK2) dongle
• DKU-2 USB cable
Note: Separate installation packages for flash update files and drivers are also available, but it is
not necessary to use them unless there are updates between
separate update packages are used, they should be used after
installed.
The phone model specific data package includes all changing product specific data:
• Product software binary files
• Files for type label printing
• Validation file for the faultlog repair data reporting system
• All product specific configuration files for
Phoenix and phone data packages should only be used as complete installation packages.
Note:
Uninstallation should be made from the
Phoenix , you need to:
To use
Steps
1. Connect a PKD-1 (DK2) dongle to the computer parallel port.
Phoenix .
2. Install
3. Install the phone-specific data package.
4. Configure users.
5. Manage connection settings (depends on the tools you are using).
• Update FPS-10 software
Note: There is no need to activate FPS-10.
• Activate SX-4 smart card, if you need tuning and testing functions.
Note: When FPS-10 is used only for product software updates, SX-4 smart card is not needed.
Issue 1
Phoenix software components
Windows Control Panel.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Nokia Customer Care
Phoenix service software releases. If
Phoenix and data packages have been
Page 3 –5