Service Tools; Product Specific Tools - Nokia RM-217 Sevice Manual

RM-217; RM-222
Service Tools and Service Concepts

Service tools

Product specific tools

The table below gives a short overview of service tools that can be used for testing, error analysis and repair
of product RM-217; RM-222, refer to various concepts.
Issue 1
FS-47
For flashing (also dead phones) with SS-64. RF testing and tuning, and
EM calibration on ATO level with SS-62 (mechanical locking concept),
CU-4 supported.
MJ-122
MJ-122 is meant for troubleshooting, testing, tuning and flashing on
the engine level (CU-4 supported).
The jig includes an RF interface for GSM and Bluetooth.
The following table shows the attenuation values for galvanic RF
connetion:
•
Band
GSM850
GSM900
GSM1800
GSM1900
RJ-148
RJ-148 is a soldering jig used for soldering and as a rework jig for the
engine module.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Flash adapter
Module jig
Tuning Attenuation RX
channel
190 0,1
37 0,1
700 0,15
661 0,15
Soldering jig
Nokia Customer Care
Attenuation
TX
0,1
0,1
0,15
0,15
Page 4 –5