Power Supply - Zte MF608 User Manual

Note: Make sure the RSSI (Radio Signal Strength Indicator)
LED is not blinking but is constantly lit up. If not please move
the modem until you get the RSSI led to be constantly lit up.
The reason why it takes 1-2 minutes is because the modem
needs to initialize, attach to the network and then only obtain
an IP address.

2.4 Power Supply

There are two ways of providing power supply to the
modem:
1. External power supply or/and
2. Rechargeable battery supply
When using the modem, please connect it with the
external power adapter. Use the rechargeable battery of the
modem in case of power failure or when there is no available
Chart 2-19 Installation is finished
18