Displayport - Toshiba SATELLITE R850 User Manual

Settings for display video on HDMI
To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
Do not change the display device under the following conditions.
Select HD Format
To select the display mode, follow the steps as detailed below:
1.
2.
3.
4.
5.
6.
7.

DisplayPort

Some models are equipped with a DisplayPort. This port enables you to
connect an external monitor.
Downloaded from LpManual.com Manuals
User's Manual
When you change the display output device by hot key like FN + F5,
the playback device may not switch automatically. In this case, in
order to set the playback device to the same device as the display
output device, please adjust the playback device manually by the
following steps:
1. Click Start -> Control Panel -> Hardware and Sound -> Sound.
2. In the Playback tab, select the playback device which you want
to switch to.
3. To use the internal speakers on your computer, select Speakers.
To use the television or the external monitor that you have
connected to the computer, select a different playback device.
4. Click the Set Default button.
5. Click OK to close the Sound dialog.
While data is being read or written.
While communication is being carried out.
Click Start and click Control Panel.
Click Appearance and Personalization.
Click Display.
Click Change display settings.
Click Advanced settings.
Click List All Modes.
Select one of the mode at List All Modes.
R850/R840/R830
3-49