Esata (External Serial Ata) Devices - Toshiba SATELLITE R850 User Manual

Connecting the DisplayPort
1.
2.
3.

eSATA (External Serial ATA) devices

An device corresponding to eSATA function can be connected to the
eSATA/USB combo port on the computer.
Connecting the eSATA device
To connect an eSATA device, follow the steps as detailed below:
1.
Make sure the connector is properly aligned with the socket.
Do not try to force the connection, doing so can damage the connecting
pins.
Downloaded from LpManual.com Manuals
User's Manual
Plug one end of the DisplayPort cable into the DisplayPort on your
external monitor.
Turn on the external monitor.
Plug the other end of the DisplayPort cable into the DisplayPort on
your computer.
As the port operation of all external monitors have not been confirmed,
some monitors may not function properly.
When you change the display output device by hot key like FN + F5,
the playback device may not switch automatically. In this case, in
order to set the playback device to the same device as the display
output device, please adjust the playback device manually by the
following steps:
1. Click Start -> Control Panel -> Hardware and Sound -> Sound.
2. In the Playback tab, select the playback device which you want
to switch to.
3. To use the internal speakers on your computer, select Speakers.
To use the television or the external monitor that you have
connected to the computer, select a different playback device.
4. Click the Set Default button.
5. Click OK to close the Sound dialog.
Connect an eSATA cable to the eSATA/USB combo port.
R850/R840/R830
3-50