Table of Contents
Advertisement
70
Getting Started
Using external display devices
NOTE
NOTE
Connecting an external monitor via the DisplayPort™
(Available on certain models.)
NOTE
To connect a DisplayPort™-compatible monitor to your computer,
read the directions that came with your monitor.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
NOTE
The quickest way to change the display output settings is to use the
(
) +
Press the (
effect. Briefly pause each time you press the (
time for the display to change.
To locate your RGB port, please refer to your Quick Start document.
You can change the display settings by pressing the (
or by configuring the display properties settings.
You may need to change the input selection on your monitor to
DisplayPort.
You may need to change the input on your television or external
display device. See the User's manual for your external display
device.
Some modes are only available with the appropriate device attached
and turned on.
keys:
P
) +
keys repeatedly until the setting you want takes
P
) +
keys,
P
) +
keys to allow
P
Advertisement
Table of Contents
