Boot Setting - Toshiba SATELLITE R850 User Manual

Always Low

Boot Setting

This function allows you to modify the boot settings.
Boot Priority Options
This tab allows you to set the priority for booting the computer. The Boot
Priority Options setting window will be displayed. Click the up and down
arrow buttons to adjust the priority.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
U
N
1
C
M
E
1
*
a bootable disk contained in the external drive.
2
*
bootable disk contained in the drive.
To change the boot drive, follow the steps below.
1.
2.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition, if
you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
Downloaded from LpManual.com Manuals
User's Manual
The floppy diskette drive will be used to start the computer when there is
The optical disc drive will be used to start the computer when there is a
Hold down F12 and boot the computer. when the TOSHIBA Leading
Innovation >>> screen appears, release the F12 key.
Use the up and down cursor keys to select the boot device you want
and press ENTER.
The processor's power consumption and
automatic clock speed switching functions are
disabled - in use the processor will always run at
a lower level of power consumption and a low
speed.
Selects the USB floppy diskette drive*
Selects the network.
Selects the built-in hard disk drive.
Selects the CD-ROM*
Selects the USB memory drive.
Selects the eSATA HDD.
R850/R840/R830
1
2
.
4-19