Toshiba SATELLITE R850 User Manual page 36

Battery lock
Battery release latch
Docking port
Memory module slot
Cooling vents
Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples and paper clips, out of the cooling vents. Foreign metal
objects can create a short circuit, which can cause damage and fire,
possibly resulting in serious injury.
Carefully clean the dust on the cooling vents' surface using a soft cloth.
Front with the display open (R850)
This section shows the computer with the display panel open. In order to
open the display, lift the display panel up and position it at a comfortable
viewing angle for you.
Downloaded from LpManual.com Manuals
User's Manual
Only the TOSHIBA Hi-Speed Port Replicator II can be used with this
computer. Do not attempt to use any other Port Replicator.
Keep foreign objects out of the docking port. A pin or similar object
can damage the computer's circuitry.
Slide the battery lock to release the battery pack
ready for removal.
Slide and hold this latch into its "Unlock" position
in order to release the battery pack for removal.
For more detailed information on removing the
battery pack please refer to Chapter 5,
and Power-Up Modes.
This port enables connection of an optional
TOSHIBA Hi-Speed Port Replicator II described
in chapter 3, Operating
Some models are equipped with a Docking port.
The memory module slot allows for the
installation, replacement and removal of
additional memory module.
1 GB, 2 GB or 4 GB memory modules can be
installed in the computer's two memory slots for a
maximum of 8 GB system memory. The actual
amount of useable system memory will be less
than the installed memory modules.
Refer to the Additional memory module
Chapter 3, Operating Basics.
The cooling vents help the processor to avoid
overheating.
R850/R840/R830
Power
Basics.
section in
2-8