Sony DAV-TZ210 Operating Instructions Manual page 26

2 Connecting the audio from your TV/set-top box
To listen to TV or set-top box sound via the system, you need to perform an audio cord (not supplied)
connection.
* The jack name differs depending on the area: TV/CABLE (for North American models) or TV (for other models).
Tip
• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV/CABLE or
TV jacks instead of your TV.
To change the color system (PAL or NTSC) (Asian, Australian, Middle
Eastern, and South African models only)
Depending on your TV, you may be required to select either PAL or NTSC for the color system.
The initial setting for Australian, Middle Eastern, and South African models is PAL.
The initial setting for Asian models is NTSC.
1
Turn off the system by pressing "/1.
2
Turn on the system by pressing "/1 on the unit while pressing FUNCTION on the unit.
Each time you perform this operation, the color system toggles between PAL and NTSC.
"NTSC" lights up in the front panel display when the color system is set to NTSC.
26
GB
Downloaded From TheatreSystem-Manual.com Manuals
O U T
A U D IO
L
R
L
IN
A U D IO
T V /
C A B L E
R
Audio cord
(not supplied)