Temperature Difference Alarm Of Built-In Sensor; External Power Supply Notification - SimPal -T2 User Manual

SIMPAL-T2 GSM Temperature Alerter USER MANUAL
•
Successful SMS reply
Schedule temperature alert function OFF

2.8 Temperature difference alarm of built-in sensor

A time period value and temperature difference value can be pre-set onto
the alerter. In this case, if the surroundings temperature difference
reaches to the pre-set value within the pre-set time period, a SMS alarm
message will be auto-sent to user's mobile phone.
Method
The Master user sends following SMS message in order to:
Enable the temperature difference alarm(Default):
Set time period and temperature difference value:
•
Temp: The values lie in the range of 3 to 20 centigrade degree.
•
Time: The values lie in the range of 1 to 10 minutes.
•
Default Temp is 5 degree and Time is 3 minute.
Disable the temperature difference alarm:
• Successful SMS reply
Rapid temperature change function ON/OFF
Delta: **
Time: ** minutes

2.9 External power supply notification

The alerter will notify the user when the external AC power is lost or
resumed. The "Beep, Beep..." tones will be heart (if enabled), also a
SMS notification will be sent if the SIM card is available. Such as "Main
supply lost". "Mains power restored".
Method
The Master user sends following SMS message in order to:
Enable SMS notification upon the power supply changing (Default):
#14#Temp#Time#
#13#1#
#13#0# (26)
(24)
(25)