SimPal -T2 User Manual page 18

SIMPAL-T2 GSM Temperature Alerter USER MANUAL
•
StartTime and EndTime: Be consists of 4 digits (hh:mm) and works
on a 24 hour clock. The StartTime and EndTime should be in the
same day, and the EndTime must be later than StartTime. Default
settings: 0700 to 2100.
•
MinTemp and MaxTemp: The values are whole numbers, can be set
within the range of -10 to 50 centigrade degree. The difference of
MinTemp and MaxTemp values should not be 0.
•
MinTemp1 and MaxTemp1 are temperature limits within the
duration. Default MinTemp1 is 18 and MaxTemp1 is 24 centigrade
degree.
•
MinTemp2 and MaxTemp2 are temperature limits beyond the
duration. Default MinTemp2 is 16 and MaxTemp2 is 24 centigrade
degree.
•
For example: #07#0#0000#2130#18#24#16#24# , 0000 means time
00:00(hh:mm)AM, 2130 means time 9:30PM.
• Successful SMS reply
Schedule temperature alert: ON/ OFF
Everyday
Setting time: ****-****
Temp alert range: **-** degree
Other times temp alert range: **-** degree
The alerter will send SMS message when it alarms:
BUILT-IN TEMPERATURE ALERT.
Current temperature reading: **
2.7.3 Disable timing alarm of built-in sensor
Method
The Master user sends following SMS message in order to:
Disable timing alarm of built-in sensor (Default):
9 Saturday to Sunday
#06#0# (23)