Over-Temperature Alarm - SimPal -T2 User Manual

SIMPAL-T2 GSM Temperature Alerter USER MANUAL

2.6 Over-temperature alarm

A range of temperature can be pre-set onto the alerter. In this case, if the
surroundings temperature is detected out of or back within the pre-set
temperature range, the alerter will auto-send the SMS alarm message to
users' mobile phone. Such as: Temperature Alert ! Current temperature
reading: **
&
Note
When "Timed alarm of built-in sensor" is enabled, the over-temperature
alarm function will disabled automatically.
2.6.1 Built-in sensor over-temperature alarm
Method
The Master user sends following SMS message to alerter in order to:
Enabled built-in sensor over-temperature alarm:
Set built-in sensor over-temperature alarm limits:
Disabled built-in sensor over-temperature alarm:
&
MinTemp and MaxTemp: The values are whole numbers,
can be set within the range of -10 to 50 centigrade degree. The
difference of MinTemp and MaxTemp values should not be 0.
&
Default MinTemp is 20 and MaxTemp is 30 centigrade
degree.
• Successful SMS reply
Temperature alert function ON/OFF.
Temperature alert range: **~ **
The alerter will send SMS message when it alarms:
BUILT-IN TEMPERATURE ALERT.
#03#MinTemp#MaxTemp#
#02#1#
#02#0#
(13)
(14)
(15)