Dell precision m90 User Manual page 64

1 modem
2 modem pull-tab
5. Install the replacement modem:
a. Connect the modem cable to the modem.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
b. Align the modem with the screw holes and press the modem into the connector on the system board.
c. Replace the screw that secures the modem to the system board.
6. Replace the Mini-Card/modem cover.
Mini-Card
If you ordered a Mini-Card with your computer, the card is already installed.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To avoid damaging the system board, you must remove the battery before you begin working inside the computer.
1. Follow the procedures in
2. Turn the computer over and loosen the captive screws from the Mini-Card/modem cover.
3. Place your finger under the cover at the indentation, and lift the cover to remove it.
Downloaded from LpManual.com Manuals
3 modem cable
4 modem connector on system board
Before You Begin.
5 modem screw