Replacing The Battery - Fujitsu lifebook p772 User Manual

Replacing the Battery

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged.
There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
Have a charged battery ready to install.
1
Shut down your notebook, disconnect the AC adapter, and turn it upside down.
2
While pushing the battery lock away from the battery, slide the battery latch towards the center of the system.
3
Lift the battery out of the bay at the lift point.
Insert a new battery into the bay, and press it down so that the latches click into place.
4
Plug in the AC adapter and turn the power on.
5
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
B
E SURE TO PLUG IN AN
WHILE THE BATTERY IS BEING REPLACED
Plug an AC Adapter into the system and connect it to a power outlet.
1
Follow steps 3 through 4 in "Cold Swapping Batteries".
2
I L
F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
. I
F YOU DO NOT USE AN
58 - Lithium ion Battery
. T
HERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM
AC A
DAPTER YOU WILL LOSE ANY UNSAVED FILES
,
YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY
.
.