U ............................................................. Display The Histogram - Olympus u 700 Advanced Manual

VIDEO OUT
NTSC / PAL
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV's
video signal type.
• TV video signal types by country/region Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
2
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Multi-connector
Settings on the camera
Set the mode dial to q, and press
the o button to turn the camera
on.
• The last picture taken is displayed
on the TV. Use the arrow pad
(1243) to select the picture you
want to display.
u
.......................................................................................... Display the histogram
OFF
Set the display or nondisplay of the histogram when d button is pressed in
shooting mode.
FRAME ASSIST
OFF
Set the display or nondisplay and the type of frame assist to be displayed when
d button is pressed in shooting mode.
38
...........................................................Playing back pictures on a TV
AV cable (provided)
/ ON
.................................Display the frame assist/Decide the type
/ w
/x
Connector cover
Connect to the TV's video
input (yellow) and audio
input (white) terminals.
Settings on the TV
Turn the TV on, and set it to video
input mode.
• For details of switching to video
input, refer to your TV's instruction
manual.