Error Message - Olympus u TOUGH-6000 Instruction Manual

Error message

When one of the messages below is
displayed on the monitor, check the
corrective action.
Error message Corrective action
q
Card problem
Insert a new card.
CARD ERROR
q
Card problem
Use a computer to cancel the
WRITE
read-only setting.
PROTECT
Internal memory problem
>
• Insert a card.
MEMORY FULL
• Erase unwanted images.
Card problem
q
• Replace the card.
CARD FULL
• Erase unwanted images.
Card problem
Use AB to select [CLEAN
•
CARD], and press the
o button. Take out the card,
CARD SETUP
wipe the contact area (p. 62)
with a soft, dry cloth, and then
CLEAN CARD
load the card again.
FORMAT
Use AB to select [FORMAT],
•
SET
OK
and press the o button. Next,
use AB to select [YES], and
press the o button.
Internal memory problem
MEMORY SETUP
IN Use AB to select [MEMORY
FORMAT], and press the
o button. Next, use AB to
POWER OFF
MEMORY FORMAT
select [YES], and press the
o button.
SET OK
Internal memory/Card problem
L
Take pictures before viewing
NO PICTURE
them.
Problem with selected image
Use photo retouch software,
r
etc. to view the image on a
PICTURE
computer. If the image still
ERROR
cannot be viewed, the image fi le
is corrupted.
*1
*1
*2
*2
Error message
r
Problem with selected image
THE IMAGE
Use photo retouch software, etc.
CANNOT
to edit the image on a computer.
BE EDITED
Operation problem
Close the battery/card
compartment cover.
CARD-COVER
OPEN
g
Battery problem
BATTERY
Charge the battery.
EMPTY
Connection problem
Connect the camera and
NO
computer or printer correctly.
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
Printer problem
Refi ll the ink in the printer.
NO INK
Printer problem
Remove the jammed paper.
JAMMED
Printer problem
SETTINGS
Return to the status where the
CHANGED
*3
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
PRINT ERROR
power on again.
r Problem with selected image
CANNOT PRINT *4 Use a computer to print.
Before erasing important images, download them to
*1
a computer.
All data will be erased.
*2
This is displayed, for instance, when the printer's
*3
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
*4 This camera may be unable to print images taken by
other cameras.
Corrective action
EN 57