Scene Mode - Olympus u TOUGH-6000 Instruction Manual

Adjust the settings for the functions while referring to "Using the Menu" (p. 3).
Selecting a scene mode according
to the shooting situation
[O SCENE MODE]
O SCENE MODE
In s mode, the optimum shooting
settings are pre-programmed for specifi c
shooting scenes. For this reason, settings
may not be changed in some modes.
Submenu 1
B PORTRAIT/
F LANDSCAPE/
G NIGHT SCENE /
*1
M NIGHT+PORTRAIT *1 /
C SPORT/
N INDOOR/
W CANDLE *1 /
R SELF PORTAIT/
S SUNSET /
*1
X FIREWORKS *1 /
V CUISINE/d DOCUMENTS/
q BEACH & SNOW/
l SMILE SHOT
*2 /
T UNDERWATER
SNAPSHOT/
k UNDERWATER WIDE1/
l UNDERWATER WIDE2/
H UNDERWATER MACRO/
Y PRE-CAPTURE MOVIE/
aSNOW
*1 When the subject is dark, noise reduction is
automatically activated. This approximately doubles
the shooting time, during which no other pictures
can be taken.
The focus is locked at the fi rst frame.
*2
To shoot with the selected mode
"Using the best mode for the shooting scene
(s mode)" (p. 18)
: s
Application
The camera takes a
picture in the mode
for the shooting
scene.
Detecting a smiling face to release the
shutter automatically
([lSMILE SHOT] mode)
1 Select [lSMILE SHOT], and then aim
the camera towards the subject.
●
The self-timer lamp turns on. When a smiling
face is detected, the camera automatically
takes 3 sequential shots.
Pictures can also be taken manually by
pressing the shutter button.
The camera may not be able to detect a
smiling face for some subjects.
[IMAGE SIZE] is limited to [I] or lower.
Capturing the perfect moment when
shooting ([YPRE-CAPTURE MOVIE]
mode)
1 Use AB to select [YPRE-CAPTURE
MOVIE], and then press the o button to
set.
●
This function is ready for shooting
immediately after setting this option.
2 Press the shutter button to start movie
shooting.
●
A 7-second movie, including 2-second movie
immediately before pressing the shutter
button, is taken.
●
The optical zoom and auto focus function are
available during movie recording.
Sound is not recorded.
AF target mark does not appear on the
monitor.
Select [IMAGE SIZE] from [VGA] or [QVGA],
and select [FRAME RATE] from [N 30fps]
or [O 15fps].
EN 31