Technical Data; Operation; Inserting/Replacing The Battery; Initial Operation - Bosch DMF 10 Zoom Operating Instructions Manual

Technical Data

Digital Detector
Article number
Maximum scanning depth*:
Ferrous metals
Non-ferrous metals (copper)
Copper conductors (live)**
Wood
Automatic switch-off after approx.
Operating temperature
Storage temperature
Battery
Rechargeable battery
Operating lifetime (alkali-manganese
batteries) approx.
Weight according to
EPTA-Procedure 01/2003
* depends on material and size of objects as well as material and condition of
structure
** less scanning depth for wires/conductors that are not "live"
Please observe the article number on the type plate of your measuring tool. The
trade names of the individual measuring tools may vary.

Operation

Inserting/Replacing the Battery

Use only alkali-manganese or rechargeable batteries.
To open the battery lid 10, press the latch 12 in the direction of the arrow
and fold up the battery lid. Insert the supplied battery. Pay attention that
the polarity is correct, according to the representation on the inside of
the battery lid.
When the battery indication k in the display lights up, measuring is pos-
sible for approx. 1 h when using alkali-manganese batteries (service life
is shorter with rechargeable batteries). When the battery indication k
flashes, measuring is still possible for approx. 10 minutes. When the bat-
tery indication k and the illuminated ring 1 (red) are flashing, measuring
is no longer possible and the battery or the rechargeable battery respec-
tively, must be replaced.
B If the measuring tool is not used for a long period of time, the
battery must be removed. The battery can corrode or discharge
itself over long periods.

Initial Operation

Protect the measuring tool against moisture and direct sun irra-
diation.
Switching On and Off
B Before switching the measuring tool on, make sure that the
sensor area 9 is not moist. If required, wipe the measuring tool dry
using a cloth.
1 609 929 P99 • 8.1.08
English–2
DMF 10 Zoom
PROFESSIONAL
3 601 K10 0..
100 mm
80 mm
50 mm
20 mm
5 min
–10 °C ... +50 °C
–20 °C ... +70 °C
1 x 9 V 6LR61
1 x 9 V 6F22
0.24 kg
6 h