Install And Format An Optional Memory Card - HP Photosmart Mz60 series User Manual

time, and format settings are correct, then press
Install and format an optional
memory card
This camera supports standard, high speed, and high
capacity Secure Digital (SD and SDHC) memory cards,
32MB to 8GB.
1. Turn off the camera and open
the Battery/Memory Card door.
2. Insert the optional memory card
in the smaller slot as shown.
Make sure the memory card
snaps into place.
3. Close the Battery/Memory Card
door and turn on the camera.
NOTE:
memory card installed, the camera indicates the
number of images you can put on the memory card at
the current Image Quality setting. This camera
supports storing a maximum of 2000 images on a
memory card.
Always format new memory cards before first use.
Formatting removes all images from the memory card, so
make sure to transfer existing images before formatting.
1. With the camera turned on, slide
2. Press
3. Use
menu, then press
4. Use
card.
10
Downloaded From camera-usermanual.com HP Manuals
again to confirm.
When you turn on your camera with a
.
to select Format Card from the
to select Yes, then press
HP Photosmart Mz60 series Digital Camera
.
to .
Delete
to format the