Suunto TRAVERSE ALPHA User Manual page 53

To navigate to a POI:
1. Press [START] to enter the start menu.
2. Scroll to NAVIGATION with [START] and press [NEXT].
3. Scroll to POIs (Points of interest) using [LIGHT] and press [NEXT].
4. Scroll to the POI you wish to navigate to with [START] or [LIGHT]
and select with [NEXT].
5. Press [NEXT] again to select Navigate.
If you are using the compass for the first time, you need to
calibrate it (see
compass, the watch starts searching for a GPS signal.
All navigating is recorded. If your watch has more than one
sport mode, you are prompted to select one.
6. Start navigating to the POI.
The watch displays the breadcrumb display, showing your position
and the position of the POI.
By pressing [VIEW] you can access additional guidance:
distance and direction to POI in straight line
•
distance to POI and estimated time en route based on your
•
current speed,
difference between your current altitude and the POI altitude
•
3.2
dst km
Building 01
3.6.1 Calibrating compass ). After activating the
Building 01
DST
3.2
km
ETE
11:30'
Building 01
AL TITUDE
2012
m
AL T DIFF
410
m
53