JUKI SC-910N Engineer's Manual page 14

3) Overlapped stitching pattern
A
B
C C
B
D
1. Press overlapped stitching pattern switch
specify the overlapped stitching pattern.
2. The overlapped stitching pattern is selected, and
the number of stitches and data on overlapped
stitching which have already been specified are
shown on the panel.
3. If you want to change the number of stitches,
operate number of stitches setting switches
for processes A through C, and to change the
number of repeated processes, operate the
" + " or " - " switch of switch
number of processes D.
The range of the number of stitches A, B and
C that can be changed : 0 to 19 stitches.
The range of the number of processes D that
can be changed : 0 to 9 times.
4. Depress the front part of the pedal once, and the
sewing machine will repeat the normal stitching
and reverse stitching by the predetermined times.
Then, the sewing machine will automatically
make the thread trimmer actuate and will stop to
complete the overlapped stitching procedure.
(The one-shot automatic stitching cannot be
turned OFF.)
5. If thread trimming prohibiting function
chosen, the machine will stop with the needle up
upon completion of the overlapped stitching
procedure without performing thread trimming.
– 10 –
to
for setting the
is