Adjusting The Drive Chain Slack - Honda CBR540F Owner's Manual

14 CBR650F FA-32MJEB000.book 71 ページ ２０１３年１２月２６日 木曜日 午後３時５８分

Adjusting the Drive Chain Slack

Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
CBR650FA only
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
1. Stop the engine place the gear in Neutral.
2. Place your motorcycle on the side stand
on a level surface.
3. Loosen the rear axle nut.
4. Loosen the lock nuts on both adjusting
bolts.
Honda CBR540F Owner's Manual
Drive Chain
Adjusting plate
Scale
graduations
Adjusting bolt
http://www.motorcycle.in.th
u Adjusting the Drive Chain Slack
Rear axle nut
Lock nut
Lock nut
Adjusting bolt
Adjusting plate
Scale
graduations
71