Adjusting The Drive Chain Slack - Honda 2012 NC700D Owner's Manual

12 NC700D (NM-2)(TH)-32MGS8000.book 79 ページ ２０１２年４月１８日 水曜日 午後９時３分
5. Inspect the sprockets.
6. Clean and lubricate the drive chain.
P. 53
2

Adjusting the Drive Chain Slack

Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
1. Park your motorcycle on its centre stand
on a firm, level surface.
2. Stop the engine. Place the transmission in
Neutral.
3. Loosen the rear axle nut.
4. Loosen the lock nuts on both sides of the
swingarm.
Drive Chain
P. 52
2
Adjusting nut
u Adjusting the Drive Chain Slack
Lock nut
Rear axle nut
Adjusting nut
Rear edge of
adjusting slot
Chain adjuster
index mark
Lock nut
79