Shooting, Playback, and Erasing
Shooting with optimum
aperture value and shutter
speed (P mode)
In this mode, automatic camera shooting can
be used while also allowing changes to a wide
range of other shooting menu functions, such as
exposure compensation, white balance and so
on as needed.
For details on the functions that can be adjusted,
see "Menus for Shooting Functions" on page 24.
1
Press the n button to turn on
the camera.
If P mode is not displayed, press the
K button a few times to select it.
Press the n button again to turn off
the camera.
14 EN
Number of storable
still pictures (p. 48)
P
10
10
M
M
N
N
ORM
ORM
IN
Monitor
(standby mode screen)
2
Hold the camera, and compose the
shot.
Horizontal grip
3
Press the shutter button halfway
down to focus on the subject.
●
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
4 4
value are displayed), and the AF target mark
changes to green.
●
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
Press halfway
"Focusing" (p. 44)
P
Monitor
1/400
1/400
F3.5
F3.5
Vertical grip
P
1/400
1/400
F3.5
F3.5
AF target mark
Shutter speed
Aperture value