Nokia RM-132 Service Manual & Parts Manual page 263

RM-132; RM-133
RF Troubleshooting and Manual Tuning Guide
2. In the Tuning menu, choose WCDMA→Rx Calibration .
3. Click Start.
4. Select Band.
5. Click Tune.
6. Setup the signal generator to correspond with the values on the,
click OK.
7. Repeat step 6. for Middle and High channels.
8. Ensure Tuning Results are within limits specified in the table below:
If values are OK, click Write to save the values.
Issue 1
Figure 57 Pop-up window for WCDMA2100
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Nokia Customer Care
Rx Calibration pop-up window and
Page 7 –45