Nokia RM-132 Service Manual & Parts Manual page 237

RM-132; RM-133
RF Troubleshooting and Manual Tuning Guide
• WCDMA troubleshooting
i Choose Testing→WCDMA→Tx Control.
Tx Control window:
ii In the
• Select the Algorithm mode tab.
• Set Start level to 0 dBm (Default = 0).
• Set Step size, Step count and Sequence to 0 (Default = 0).
• In the Scrambling code pane set Code class to LONG (Default = LONG), and Code to 16 (Default
= 16).
• For DPDCH set the following values:
• Code number: 0
• Code class: 2
• Weight: 15
• For DPCCH set the following values:
• Code number: 0
• Code class: 2
• Weight: 8
• Set Channel to 9750.
• Check the DPDCH enabled check box (Default).
Issue 1
RF Controls window
Figure 54
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Nokia Customer Care
Page 7 –19