Olympus SP-590 UZ Instruction Manual page 56

For details on changing the input source of the TV, refer to the TV's instruction manual.
Set the mode dial to q when connecting via an AV cable.
Use an HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector
on the TV.
The movie playback screen cannot be displayed when connecting via an HDMI cable. In addition, the
sound will not be played.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable
will take priority.
Depending on the TV's settings, the displayed images and information may become cropped.
Selecting the digital video signal format for connecting to a TV via an HDMI cable
[HDMI]
E SETUP  HDMI
"To play back camera images on a TV" (p. 55)
Submenu 2
480p Images are played back in 480p format.
720p Images are played back in 720p format.
1080i Images are played back in 1080i format.
When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not
match the input setting of the TV, the resolution is changed first to 720p and then to 480p. For details
on changing the input setting of the TV, refer to the TV's instruction manual.
Displaying the brightness distribution [u]
E SETUP  u
Submenu 2
OFF No histogram is displayed.
ON A histogram (a brightness distribution as a guide for determining the exposure) is displayed.
White-out areas are displayed as red, and black-out areas are displayed as blue directly on
DIRECT
the image.
"Changing the shooting information display" (p. 25), "Changing the image information display" (p. 27)
Registering a set of shooting settings under my mode labels [MY MODE SETUP]
E SETUP  MY MODE SETUP
Submenu 2
s MY MODE 1/
CURRENT
E MY MODE 2/
c MY MODE 3/
RESET
d MY MODE 4
Taking pictures using "MY MODE"
1 Set the mode dial to
2 Select the desired mode from
 EN
Submenu 3 Submenu 4
SET/CANCEL
RESET/CANCEL
.
r
to
s
d
Application
Application
[SET] sets the current menu function settings to the
selected my mode label (s/E/c/d).
[RESET] returns the functions in the selected my
mode label to their defaults.
. "Using the FUNC menu" (p. 26)
Application