Using A Function Assigned To - Olympus SP-590 UZ Instruction Manual

Locking the exposure and/or
focus position for shooting
(AE LOCK/AF LOCK)
Once the exposure and/or focus position are/is
set for a subject in shooting mode, you can
continue shooting at the same exposure, focus
positior or both (AE LOCK, AF LOCK or AF
LOCK + AE LOCK) even if the composition of
the shot is changed.
1
Assign either [AE LOCK], [AF
LOCK] or [AF LOCK + AE LOCK] to
the z button.
●
In the default setting, [AE LOCK] is assigned to
this button.
[CUSTOM BUTTON] (p. 57)
2
Compose the shot and press the z
button.
●
The exposure/focus position setting assigned in
step 1 is locked.
AF target mark
^ mark
To cancel the setting
z
Press the button again so that the
B/^ mark no longer appears.
3
After changing the composition of
the shot, press the shutter button.
 EN
B mark
P
AEL
AFL
1/400 F3.5
When setting the
[AF LOCK + AE LOCK]

Using a function assigned to

the z button (Custom button)
This allows you to register a frequently used
function (except h , I , A ). Once
registered, you can set the settings directly with
the button instead of displaying the screen from
the menu.
[CUSTOM BUTTON] (p. 57)
1
Press the z button.
P
2
Use 9: to select the setting option,
and press the o button to set.
Using the FUNC menu
The FUNC menu provides the following menu
functions that can be quickly called and set.
• [DRIVE] (p. 32)
• [WB] (p. 30)
• [METERING] (p. 33)
• [A IMAGE QUALITY] (p. 29)
• [MY MODE SETUP] (p. 56)
• [ISO] (p. 31)
When the mode dial is set to the r, s to
d are selectable.
1
Press the o button before
shooting.
c
3 3
ISO
1600
12 12
M M
F
INE
2
Use 78 to select the menu
function and 9: to select the
setting option, and then press the
o button to set.
NR
SET OK OK
FINE ZOOM
OFF ON
MY MODE 2