Osd Warning Messages - Dell 2209WA User Manual

Menu
Rotation
Power Save
Audio
DDC/CI
LCD
Conditioning
Factory Reset
Note: This monitor has a build-in feature to automatically calibrate the brightness to compensate for CCFL aging.

OSD Warning Messages

When the monitor does not support a particular resolution mode you will see the following message:
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1680 x 1050.
You will see the following message before the Dynamic Contrast function is disabled.
Downloaded from ManualMonitor.com Manuals
NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock
selected. Select "Unlock" to unlock and allow user access to all applicable settings.
Rotates the OSD by 90 degrees counter-clockwise. Your can adjust the menu according to your
To turn on or off Audio Power during Power Save mode.
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
via software on your PC. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run.
You can enable this feature by selecting "Enable".
Reset all OSD settings to the factory preset values.
Display Rotation.
Monitor Specifications for the