Connecting Other Equipment - JVC MX-WMD90 Instruction Manual

Connecting Other Equipment

You can connect the following equipment to this unit:
• Cassette deck — used as a playback and recording
device. By using the cassette deck, you can record any
source played back on this unit.
• Audio equipment — used only as an analog playback
device.
• Audio equipment with an optical digital output terminal
— used only as a digital playback device.
When you connect and use these equipment, refer also to
the manuals supplied with them.
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
• DO NOT connect other equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect a cassette deck
To input
To output
By using audio cords (not supplied), connect:
• Between the audio input jacks on the cassette deck and
the TAPE OUT (REC) jacks — For recording on the
cassette deck.
• Between the audio output jacks on the cassette deck and
the TAPE IN (PLAY) jacks — For playing a tape.
Downloaded From Disc-Player.com JVC Manuals
ANTENNA
Cassette deck
To connect audio equipment without a digital output
terminal
To output
Connect the audio output jacks on the other equipment and
the AUX jacks, using an audio cord (not supplied).
– 8 –
Continued
ANTENNA
Audio equipment
without a digital output