JVC MX-WMD90 Instruction Manual page 12

To connect audio equipment with an optical digital
output terminal
Before connecting the other equipment,
remove the protective plug from the terminal.
To optical digital output
To output
By using both an optical digital cord (not supplied) and an
audio cord (not supplied), connect:
• Between the optical digital output terminal on the other
equipment and the AUX DIGITAL IN OPTICAL
terminal.
• Between the audio output jacks on the other equipment
and the AUX jacks.
Downloaded From Disc-Player.com JVC Manuals
ANTENNA
Protective plug
Audio equipment with an
optical digital output
NOW, you can plug in the unit and other connected
equipment FINALLY!
ANTENNA
To a wall outlet
When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
To stop the display demonstration, press any button on
the unit or the remote control.
To start the display demonstration manually
Press DEMO.
• Even while the unit is turned off, you can see the display
demonstration.
To stop the demonstration, press any button.
– 9 –