Olympus FE-240/X-795 Advanced Manual page 53

When you get an error message on the camera...
Monitor indication
q
CARD ERROR
q
WRITE-
PROTECT
>
MEMORY FULL
q
CARD FULL
L
NO PICTURE
r
PICTURE
ERROR
r
THE IMAGE
CANNOT BE
EDITED
CARD-COVER
OPEN
g
BATTERY
EMPTY
C A R D S E T U P
POWER OFF
FORMAT
OK
SET
M E M O R Y S E T U P
POWER OFF
MEMORY FORMAT
SET OK
Possible cause
There is a problem with
the card.
Writing to the card is
prohibited.
The internal memory
has no available
memory and cannot
store any new data.
The card has no
available memory and
cannot store any new
data.
There are no pictures in
the internal memory or
on the card.
There is a problem with
the selected picture and
it cannot be played back
on this camera.
If pictures taken by other
cameras are selected,
they cannot be edited.
The battery/card
compartment cover is
open.
The battery is empty.
This card cannot be
used in this camera. Or,
the card is not formatted.
There is an error in the
internal memory.
Corrective action
This card cannot be used. Insert a
new card.
The recorded image has been
protected (read-only) on a computer.
Download the image to a computer
and cancel the read-only setting.
Insert a card or erase unwanted
data. Before erasing, backup the
data of important pictures using the
card. or download such pictures to a
computer.
Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
The internal memory or the card
contains no pictures.
Record pictures.
Use image processing software to
view the picture on a computer. If that
cannot be done, the image file is
damaged.
Use image processing software to
edit the pictures.
Close the battery/card compartment
cover.
Charge the battery.
Format the card or replace.
• Select [POWER OFF] and press
. Insert a new card.
• Select [FORMAT]
press . All data on the card is
erased.
Select [MEMORY FORMAT]
[YES] and press . All data in
the internal memory is erased.
[YES] and
53
EN