The Date And Time Have Not Been Set; Shooting Tips; Focusing On The Subject; Subjects That Are Difficult To Focus On - Olympus FE-240/X-795 Advanced Manual

Olympus digital camera owner's manual
Hide thumbs Also See for FE-240/X-795:
Table of Contents

Advertisement

The date and time have not been set

The camera has been used in the same condition from the time of purchase
• No date and time have been set in the camera at the time of purchase. Set
the date and time before using the camera.
g "Set the date and time" (P. 6), "X Setting the date and time" (P. 28)
The battery has been removed from the camera
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 3 days. If the battery is in
the camera for a short period of time, the date and time setting will be reset
earlier than this. Before taking important pictures, check that the date and
time settings are correct.

Shooting tips

Focusing on the subject

There are several ways to focus, depending on the subject.
When the subject is not in the center of the frame
• Place the subject in the center of the frame, lock the focus on the subject, and
then recompose your picture.
g "Shutter button Shooting pictures/movies" (P. 10)
The subject is moving quickly
• Focus the camera on a point roughly the same distance away as the subject
you want to shoot (by pressing the shutter button halfway); and then
recompose your picture and wait for the subject to enter the frame.
g "f Shooting pictures by selecting a scene mode according to the
situation" (P. 12)

Subjects that are difficult to focus on

• Under certain types of conditions, it is difficult to focus using auto focus. The
green lamp on the monitor lights, allowing you to check if the focus is locked.
The green lamp
blinks.
The subject cannot
be brought into focus.
The green lamp
lights, but the
subject cannot be
brought into focus.
In these cases, focus (focus lock) on an object with high contrast at the same
distance as the intended subject, recompose your shot and then take the
picture. If the subject has no vertical lines, hold the camera vertically and
focus the camera using the focus lock function by pressing the shutter button
Subject with low
Subject with an
contrast
extremely bright
area in the center
of the frame
Subjects at
Fast-moving
different distances
subject
Subject without
vertical lines
The subject is not
in the center of the
frame
47
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents