Display Warnings And Maintenance - Chrysler 300 Owner's Manual

188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Push the SET + or the SET- button (located on the steering
wheel) and the following will display in the DID:
ACC SET
When ACC is set, the set speed will display in the
instrument cluster.
The ACC screen may display once again if any ACC
activity occurs, which may include any of the following:
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
• The DID will return to the last display selected after
five seconds of no ACC display activity

Display Warnings And Maintenance

"Wipe Front Radar Sensor In Front Of Vehicle"
Warning
The "ACC/FCW Unavailable Wipe Front Radar Sensor"
warning will display and also a chime will indicate when
conditions temporarily limit system performance.
This most often occurs at times of poor visibility, such as
in snow or heavy rain. The ACC system may also become
temporarily blinded due to obstructions, such as mud,
dirt or ice. In these cases, the DID will display "ACC/
FCW Unavailable Wipe Front Radar Sensor" and the
system will deactivate.
The "ACC/FCW Unavailable Wipe Front Radar Sensor"
message can sometimes be displayed while driving in
highly reflective areas (i.e. tunnels with reflective tiles, or
ice and snow). The ACC system will recover after the
I n f o r ma t i o n P r o v i d e d b y :