Chrysler 300 Owner's Manual page 134

132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Front Heated Seats
The front heated seats control buttons are located within
the climate or controls screen of the touchscreen.
You can choose from HI, LO or OFF heat settings. The
indicator lights in each switch indicate the level of heat in
use. Two indicator lights will illuminate for HI, one for
LO and none for OFF.
• Press the heated seat button
setting ON.
• Press the heated seat button
the LO setting ON.
• Press the heated seat button
the heating elements OFF.
If the HI-level setting is selected, the system will auto-
matically switch to LO-level after approximately 60 min-
utes of continuous operation. At that time, the display
will change from HI to LO, indicating the change. The
LO-level setting will turn OFF automatically after ap-
proximately 45 minutes.
NOTE:
• Once a heat setting is selected, heat will be felt within
• The engine must be running for the heated seats to
once to turn the HI
Vehicles Equipped With Remote Start
a second time to turn
On models that are equipped with remote start, the
heated seats can be programed to come on during a
a third time to turn
remote start.
This feature can be programmed through the Uconnect®
system. Refer to "Uconnect® Settings" in "Understand-
ing Your Instrument Panel" for further information.
I n f o r ma t i o n P r o v i d e d b y :
two to five minutes.
operate.