Turning Off The Projector - NEC NP4001 User Manual

Turning off the Projector

Once the projector is no longer required, it is important to shut it down correctly to avoid
damage or unnecessary wear and tear to the projector.
CAUTION
Refer to the following guide to shut down the projector.
1.
Press the On/Standby button
once. The OSD displays the
message shown on the right.
2.
Press the On/Standby button
again or Enter on the OSD con-
trol panel or the remote control
to verify power off.
The cooling fans keep operating
for a while (Cooling-off time).
The cooling fans stop operating
when the projector turns off
3.
The projector enters Standby
mode and the power LED lights
orange.
4.
Press the Main Power switch to
the off position (O) to turn off
the projector.
Downloaded From projector-manual.com NEC Manuals
• Do not unplug the power cable from the wall outlet or projector when
the projector is powered on. Doing so can cause damage to the AC IN
connector of the projector and (or) the prong plug of the power cable.
To turn off the AC power supply when the projector is powered on,
use a power strip equipped with a switch and a breaker.
• Do not turn off the AC power supply within 10 seconds of making ad-
justment or setting changes and closing the menu. Doing so can
cause loss of adjustments and settings and return to default.
3. Projecting an Image (Basic Operation)
47